Our dog Bella is about 9 years old now, and she has arthritis in at least her back hips, and I suspect her front ones are developing it as well.
So, my wife and I figured she needed some kind of step to help her get up onto her favourite chair, so this past weekend I made her a step to help her get onto her chair.
All projects begin with some planning. Design wise, it’s pretty basic. It is just a wooden crate. Sketchup is fun and easy to use for sketching out designs like this. I began using dimensions from pine timber at Bunnings, but due to there being a surprise amount of timber needed to go into it, I decided to use what I could scrounge up around the house. Free is always good.
This is a rough cut and screw together project. There is no fine woodworking happening here!
In order to avoid bothering with trying to glue up a bunch of not completely straight pieces of timber, I went with screws. The strips of timber on the ends hold the two side pieces together. They are also decorative. Width wasn’t particularly important, and these were offcuts from ripping the timber for the thin strip on the top of the side.
On a side note, It can be a pain to rip a board that is already cut to length with a hand held circular saw, as the fence runs out of timber to guide it. It is easier to do if the board is longer than needed though.
For anyone interested in building something similar, Here is a picture of the sketchup drawing of my project. Please note that I made this to suit the timber I had lying around, and to match about 1/2 the hight of the chair, so if you are making this for a similar purpose, you may need to adjust your sizing to suit your chair, and the timber you are using. You could also turn this upside down, and it makes a fairly sturdy storage crate.