Visiting my local maker space, and playing with 3d printers

So, Last night I payed my second visit to my local maker space here in Canberra, Make Hack Void. A couple of weeks ago, I came to chat about 3d printers, and this week I came in hopes to get hands on experience with the one they have at the space – a Lulzbot TAZ 5. I’d never had the opportunity to play with a 3d printer before, but had read about them in passing previously.

A few weeks back, my father was talking to me about 3d printers, and that his local Mens Shed was interested in possibly purchasing one to learn and experiment with. With this in mind, I began researching printers a bit more seriously, and I finally made the plunge to go visit Make Hack Void, as it seems like a great place to learn about such things without breaking the bank and buying a 3d printer myself.

Getting involved in MakeHackVoid has been on my todo list for waaay to long, so it’s nice to finally get a chance to visit.

All they guys I’ve met so far have been really friendly, and even though I’ve only been there twice, and I’m generally an awkward, shy person in unfamiliar places, I felt comfortable, included and at ease. I actually felt part of the place.

Anyway, back to the 3d printers. I bought with me a few models that I’d like to print, but starting with a fairly basic model that would print fairly quickly, and allow me to get things done.

The model I was printing was a modified version of this model:

I modified the original print to remove the actual Lyre style shockmount for this print. It’s pretty basic, but it prints fairly quickly (this took about an hour), and lets me check the sizing of the clip, and cold shoe, as well as seeing if the arms are likely to snap in half as soon as I try and clip in the microphone. The model I printed is shown below, and I’ve uploaded it to Thingiverse at:


The Lulsbot Taz5 printed my first print fantastically. It was touch and go early on, when the long skinny clip arms came off the print bed, but damage was minimal, and the print kept going, all the way to completion, and I ended up with a very usable print.

3D printers are mesmerising to watch, and the Taz5 sounds like a happy little robot buzzing around the printbed as it worked away.

As I mentioned earlier, the print I did last night took about an hour to print. While it printed, we chatted about 3D printers, and some electronics, and I managed to snap a few pictures of the print in progress, as well as the settings we used:

Finally, once the print was complete I let the printer cool for a few minutes and then the print popped right off the print bed.

Once I got home, I  snapped a few pictures of the completed clip, so you can see the details of the print, and attached the mic to the camera, so you can see it in action.

So my first hands on 3D printer experience went better than I could have expected, and everyone at Make Hack Void are really friendly & inviting. I look forward to coming back again soon so I can have good chat with everyone, and play some more with the printer!