so this installment is by far the easiest of these circuits, only consisting of 2 components, the Potentiometer, and the circuit block. I chose to use a 10k pot, as i have a bunch of them in one of my parts boxes. I’m not sure if it matters what resistance they are, i’m guessing its not overly critical, as i couldn’t see anything in the picaxe manual about values to use.
If you haven’t worked it out already, the terminal block is soldered straight onto the potentiometer. I had to bend the pins of the pot down, so i could get the terminal block nice and close.
So, go have fun kiddies.